ultiline Technology will be pleased to send you samples of our “Tefstops”. Our Tefstops are used in the Pin Lamination area. If you face resin bleed and resultant burrs around tooling holes after lamination then, Tefstops can be a cheaper alternative solution to deburring. Resin burrs from lamination also keep the panel from lying flat in exposure and sometimes crack phototooling glass books. Tefstops eliminate the need for expensive secondary machining operations. Tefstop washers fit tightly on lamination pins preventing epoxy flow during lamination . We offer three different sizes to fit your lamination needs:

Slot Type Round Type Round Type

1) 0.1875” x 0.250” ID x .500”OD 2) 0.250” ID x 0.500” OD 3) 0.1875” ID x 0.500” OD

(P/N 30-D111-1) (P/N 30-D111-2) (P/N 30-D111-3)

As a recognized leader in the Printed Wiring Board Industry, Multiline Technology is dedicated to providing our customers with outstanding products and superior services. We look forward to fulfilling your manufacturing needs by creating a lasting partnership between Multiline Technology and your company.

We carry a large stock on hand and we’re ready to satisfy your production requirements. If you need samples please feel free to contact Jim Orlando or Mary Endres in our sales department.

Home | About Us | Staff | Directions | Products | News | Trade Shows | Literature | Employment | Contact Us

© 1999 Multiline Technology